Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Impossible to configure Cyclone III with JTAG

Hello, I have a problem with Cyclone III EP3C25F324 device programming. I'am using a board with 1 cyclone III, a EPCS128 device and a PC28F128P30BF65E flash. Flash Ram is not connected to th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I don't see any image. 1.5V seems rather low... could you show the schematics of your JTAG connection?