Forum Discussion

GLees's avatar
GLees
Icon for Contributor rankContributor
7 years ago

I'm using a MAX10 10M16SC device. How can I find out the maximum toggle rate for general purpose I/O pins?

The datasheet says "For more information about the high-speed and low-speed I/O performance pins, refer to the respective device pin-out files.". The pin-out files only refer to "high speed" and "low...
JosephC_Intel's avatar
JosephC_Intel
Icon for Contributor rankContributor
7 years ago

Hi,

We appreciate your request and using this new forum. Unfortunately, Intel PSG no longer publish the value of toggle rate externally since few years back. All of the standard supported I/O signaling frequencies is depended on design and also system customization form factors.

Therefore, the I/O toggle rate specifications was being removed from Max 10 device data sheets. For your case, the best options is using HSPICE or IBIS simulations.

You can refer to full IBIS Models for Intel® Devices as captured in below link:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/download/board-layout-test/ibis/ibs-ibis_index.html

Hope this helps.

Thanks,

Joseph

Intel Customer Support