I miss the device (Cyclone) "EP1C12F256C6" in the Quartus II(without service pack 2).

--- Quote Start ---

I miss the device (Cyclone) "EP1C12F256C6" in the Quartus II(without service pack 2).

What can i do?

--- Quote End ---

I assume from the mention of SP2, that you must have version 11.0 installed. Do you have the subscription edition or web edition? If you look on the web edition page, you will see that Cyclone I series devices are not supported in the latest web edition software.

http://www.altera.com/products/software/quartus-ii/web-edition/qts-we-index.html

I just checked 11.1sp1 subscription edition, and it still allows you to select this device family. So you must be using Web Edition.

You will need to download an earlier release of the Web Edition. I'd try 10.1sp1:

ftp://ftp.altera.com/outgoing/release/

ftp://ftp.altera.com/outgoing/release/10.1sp1_quartus_free_windows.exe

Cheers,

Dave

Dear Altera Guru and companion!

First, thank you for reply!

I have installed Win7.

I have installed the web Edition 11.1 now

WITH SP2.

Let's try a another way:

Exists a newer type of FPGA, compatible

and Pin compatible to the "EP1C12F256C6"

in the Altera-Quartus II (11.1)?