Forum Discussion

KLohr's avatar
KLohr
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

I have a 10M04SAU169C8G that I can program and run with the ByteBlaster through the JTAG Pins, but it doesn't hold the configuration when power is cycled. Any thoughts?

KLohr's avatar
KLohr
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Thanks Abe. Yes, I had internal configuration selected, but the programmer came up with the .sof file loaded. It wasn't obvious (to me) that it wasn't the .pof.