Forum Discussion

JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

I am working with the cyclone V device.Currently i am processing the lvds signals.

The major problem is, i cannot route the input lvds signal between the input to the LVDS_RX IP and input to the lcd externally connected at the same time.Either as input to the lcd or IP is possible...
JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Thanks for the illustration. I see what you mean. Unfortunately, no, you wont be able to branch out from the LVDS RX input.

JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

Actually iam trying to branch out the input lvds signal from FPGA to outside LCD.since the input to the lcd is lvds signals, is there any way for feeding the lcd with the same lvds signals by any other means using the fpga.