Forum Discussion

JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

I am working with the cyclone V device.Currently i am processing the lvds signals.

The major problem is, i cannot route the input lvds signal between the input to the LVDS_RX IP and input to the lcd externally connected at the same time.Either as input to the lcd or IP is possible...
JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi @JGeor12​

I would like to help but its hard for me to imagine the topology that you are referring. A diagram would be great.

If you mean like a single TX to multiple RX via LVDS, then I dont think it is possible.

JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

The logic is illustrated in the attached figure.Here i am trying to feed lvds rx ip and lcd with the same lvds input.But it is leading to the routing problems.So is there any way for achieving this.