Forum Discussion

CHatz's avatar
CHatz
Icon for New Contributor rankNew Contributor
7 years ago

I am using the same JTAG connector to test the FPGA with System Console and to monitor signals with Signal Tap analyzer.

I cannot program the FPGA using signal tap when System Console is open. The other issue I am having is that Signal Tap analyzer won't trigger when I am accessing registers fro System Console (both t...
CHatz's avatar
CHatz
Icon for New Contributor rankNew Contributor
7 years ago

The problem was that the tools were assigning the Sigal Tap instantiation to a different JTAG port. When I placed Signal tap and System Console on the same JTAG port, the problem was eliminated.