Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

HSMC Interface - Signaling at 3.3V

Well, I need to connect to a CAN Transceiver. Therefor 2.5V are too less and so I need to have 3.3V for signaling(RX and TX). I set already under [Assignments -> Device ->Device and Pin Options...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

THX!

Not possible to increase Voltage by Software.