Forum Discussion

rshal2's avatar
rshal2
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

HPS I/O set required option is missing in qsys

Hello, I use arria v 5ASXFB5H4F40 device. In schematic, uart #0 is connected to A15 (tx), B14 (rx) pins, and uart #1 is connected to N13 (tx), G13 (rx). According to pinsout excel (https://www.int...
Rahul_S_Intel1's avatar
Rahul_S_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi Ran,

I am evaluating from myside and need some to fix the above