Forum Discussion
EEren
Occasional Contributor
Occasional ContributorHow to prepare a rpd file
I have a bootloader in CFM0 sector. I feed a rpd file through serial, after uploading the file to the FPGA flash it reports success. But when I switch to CFM1 it fails and goes back to CFM0. I suspe...
JohnT_Altera
Regular Contributor
Regular ContributorHi,
Please refer to https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/m10_datasheet.pdf Table 52 for the binary size.
