Forum Discussion

НЛоги's avatar
НЛоги
Icon for New Contributor rankNew Contributor
7 years ago

How to manage CRC_ERROR pin through JTAG?

Hello. I need to work with SEU in Arria 10. I've installed EMR Unloader IP in my design and it works as expected. I can make changes in EMR through JTAG (in-system sources and probes). The proble...
Nooraini_Y_Intel's avatar
Nooraini_Y_Intel
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

Hi НЛоги,

In order to test the CRC_ERROR pin you do require to use the Fault Inject debugger together with the Fault Injection IP. There is no method that you can inject the error via JTAG.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an737.pdf

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_fault_injection.pdf

If you have Quartus Prime Standard license, you can try to check within the Self Service License Center submit the Contact Customer Service form at:

https://fpgasupport.intel.com/Licensing/license/contact.html

Otherwise contact your local Intel FPGA sales representative for the Fault Inject IP license.

https://www.intel.com/content/www/us/en/partner/where-to-buy/overview.html

Thank you

Regards,

Nooraini