Forum Discussion

TPham24's avatar
TPham24
Icon for New Contributor rankNew Contributor
6 years ago

How to flash memory when power on Max 10 (10M02SC)?

Hello everybody! I'm Pham Tu Tai! I used Cyclone 2 for my project. But i'm using Max 10 series (10M02SC) now. I dont know how to flash memory for Max 10. Because Cyclone 2 use EPCS4 for programmab...
ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi TPham24,

MAX 10 device come with Internal Flash Memory. Usually it is enough to program design/project.

(when convert programming file(ie .pof file), select mode = "Internal configuration")

However, if you need extra memory space, you can use EPCQ-A device. You can follow the following KDB for more details how to program EPCQ-A device with MAX 10.

https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base/embedded/2019/how-to-program-epcq-a-devices-used-in-an-max---10-design-.html

Hope this will help.

Thanks