Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorHow to do a frequency multiplier?
Hi all,
I have a CPLD EPM3064AT44. I wonder is it possible to do a frequency multiplier, which would output 6M signal while inputting 1M? Thanks!1 Reply
Altera_ForumSimply, no. That device family is a fairly simple CPLD architecture. There are no internal PLL blocks that can do frequency multiplication.
Look for a MAX10 based board, even the smallest devices in the family have at least a couple of PLL blocks. No PLC packaging, however. Or a Cyclone FPGA based board, all the Cyclone parts contain multiple PLL blocks.
