Forum Discussion

Icon for Occasional Contributor rank

Occasional Contributor

6 years ago

Solved

How to connect 2 DDR3 interfaces to FPGA ?

Hello, Is there a description and example for connecting 2 DDR3 interfaces to FPGA ? Thank you, Ran

HBhat2
6 years ago
Hi,
If you are using Arria 10 FPGA, refer to the below document
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-20115.pdf page 38, "2.6. Hardware Resource Sharing Among Multiple EMIFs " and "Figure 17. I/O Bank Sharing "
Similarly, there should be documents for other FPGAs.
https://www.intel.com/content/www/us/en/programmable/support/literature/lit-external-memory-interface.html
With Regards,
HPB

Icon for Contributor rank

Contributor

6 years ago

Hi,

If you are using Arria 10 FPGA, refer to the below document

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-20115.pdf page 38, "2.6. Hardware Resource Sharing Among Multiple EMIFs " and "Figure 17. I/O Bank Sharing "

Similarly, there should be documents for other FPGAs.

https://www.intel.com/content/www/us/en/programmable/support/literature/lit-external-memory-interface.html

With Regards,

HPB