Forum Discussion

SOdin1's avatar
SOdin1
Icon for New Contributor rankNew Contributor
6 years ago

How to access Stratix 10 AS configuration pins in user mode?

Is there a way to access Stratix 10 AS configuration pins (SDM_IO*) in user mode, e.g. after device configuration via JTAG? The goal is to program SPI flash with custom image through FPGA bypassing ...
SOdin1's avatar
SOdin1
Icon for New Contributor rankNew Contributor
6 years ago

Hi SooY,

thanks for the answer.

However, "The Serial Flash Mailbox Client IP sends commands to the secure device manager (SDM) in the Intel® Stratix® 10 device."

My question is it possible to access AS configuration pins directly from the FPGA, not through the SDM, like it is possible in the other device families.