Forum Discussion

KDuma's avatar
KDuma
Icon for New Contributor rankNew Contributor
7 years ago

Hi All, Just wanted to know... Is there a way to convert *.POF file to Schematics file?

We are using MAX 7000S series CPLD in our product lines which were developed long long ago. Since MAX7000 series is now obsolete, we plan move to other CPLD series. we do not have source files. we ...
CalvinJoaz_P_Intel's avatar
CalvinJoaz_P_Intel
Icon for Contributor rankContributor
7 years ago

Hi Krishnanand,

It is not possible to convert .pof file to schematics file.

The POF file is used to program an external configuration (A FLASH/EEPROM device - not the actual FPGA)

Plus, it’s not advisable to use or change the .pof file for other devices.

Yes, MAX 7000 devices are mature devices and has already been obsolete. For new design, it has been migrated into MAX 10 or MAX V or MAX II.

Kindly refer link below for 'Intel® MAX® Series FPGAS and CPLDS'.

https://www.intel.com/content/www/us/en/products/programmable/max-series.html

Thank you.