Forum Discussion

New Contributor

6 years ago

Hi I would like to ask a questions about measure BSC package outline dimension.

100-Pin (TQFP) package have 14mm BSC dimension for size D1 and E1. After measure this dimension I have 13.82-13.84mm. Package with dimension D1/E1 13.82mm conform specification for 100-Pin (TQFP)? ...

ALahn1

New Contributor

6 years ago

Hi,

Part number EP1C3T100C6N package https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ds/pkgds.pdf#page=67-68

This question about how to conform specification for all Intel FPGA package with BSC dimension, if BSC dimension do not have tolerance? https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ds/pkgds.pdf

Forum Discussion

Hi I would like to ask a questions about measure BSC package outline dimension.

Recent Discussions

IP components used in the design have conflicting settings. Intel PCIE Ftile MCDMA

Implementation of lower data rate.

Error (209014): CONF_DONE pin failed to go high in device 1.

eFUSE : Agilex F series and AGilex I series PCIe card

EP4CGX22CF19C8N Failure Short D8 to C8

Forum Discussion

Hi ​I would like to ask a questions about measure BSC package outline dimension.

IP components used in the design have conflicting settings. Intel PCIE Ftile MCDMA

Implementation of lower data rate.

Error (209014): CONF_DONE pin failed to go high in device 1.

eFUSE : Agilex F series and AGilex I series PCIe card

EP4CGX22CF19C8N Failure Short D8 to C8

Hi I would like to ask a questions about measure BSC package outline dimension.