Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Help choosing products

I'm characterizing an instrument that is powered by a PCI card. We decided to use an FPGA to control the PCI card. After reading about Quartus and SPOC Builder I'm know that this will work. My pro...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I was looking at the Cyclone PCI kits.

As for the analog signals, they will be 0-5V with BNC connectors. I figured the signals would go through an ADC and then be hardwired onto the board but wasn't sure about the space for inputs on the board.

Also, will the PCI compiler take care of communicating with the other PCI card? I need it to go from the FPGA to the other PCI directly without going through the CPU.