Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

FT2232H 245 Synchronous FIFO Mode problem

Hello Im very new to FPGA's and am still learning so please be kind if the problem is obvious :) i have a FT2232H set to 245 Synchronous FIFO Mode. i have a program on the pc using...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Setbitmode works fine. But, i'd like to use this clock into fpga to my state machine.

In the schematic clkout pin is connected to FPGA J2 pin. My state machine is not running.

I copy pin J2 to another pin (debug pin) to see the waveform in oscilloscope. The debug pin remains in zero level. Is pin clockout from FT2232H connected to FPGA J2 pin ?