Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

FT2232H 245 Synchronous FIFO Mode problem

Hello Im very new to FPGA's and am still learning so please be kind if the problem is obvious :) i have a FT2232H set to 245 Synchronous FIFO Mode. i have a program on the pc using...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

yup the issue was the way i set up the hardware. i had to add a clk termination resister to stop signal bounce back :) the second i added this one resister it works perfect :)