Forum Discussion

Rog's avatar
Rog
Icon for New Contributor rankNew Contributor
3 years ago

FPGA support files for openvino?

Hi, I have been given a IEI Mustang F100 with a GX660 fpga to examine, I can only see the Fpga support files (sof & aocx) for the GX115 variant. Can someone please point me to the files for the GX6...
BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
3 years ago

Hi @Rog,


After some investigation internally, good news there might be some A10 GX design that we can refer to as the link below:

https://www.intel.com/content/www/us/en/design-example/749026/arria-10-pcie-gen3x8-avmm-dma-with-external-ddr4.html


However that particular design are for different application purposes, and for cases where openvino application, there might be some major custimization required in this case.

Hence please do look through the above link and hope that helps.


Best Wishes

BB


  • Rog's avatar
    Rog
    Icon for New Contributor rankNew Contributor
    3 years ago
    Thanks for the reply BB, I will certainly have a look.

    I hear what you say about openvino.

    As far as OpenCL goes, I read talk of porting it to devices in your documents but haven't tried anything yet.

    If it's OK, I would like to leave this thread open in case I have any follow up questions - you never know, my experience and your responses might help others too

    Thanks again.