Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

FPGA IO configed as 1.8V not working

Hi, I read from the device handbook and get that the cyclone2 devices support multi-voltage IO standards, such as 3.3/2.5/1.8/1.5 volt. I change the IO voltage to 1.5 volt in the device option...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

--- Quote Start ---

so I hope the IO voltage setting has only information purpose.

--- Quote End ---

This should be true at least for MAX II. With FPGA, the I/O standard also affects the interpretation of the current strength setting.