Forum Discussion
nome
Occasional Contributor
Occasional ContributorFPGA configuration without cpld
hello I m using arria ii gx with cfi nor parallel flash memory x8 FPP Mode As we know when we start configure fpga from cfi flash we should have cpld and processor or directly from spi flash it is al...
Hi,
Just to let you know that as @sstrell mentioned, 'Active' mode is required to initiate the configuration by FPGA itself. In 'Passive' mode, an external device such as CPLD or microprocessor should initiate it.
Choose according to your need and available component.
Regards
nomeOccasional Contributor
Occasional ContributorHello
Thanks for your Reply
In our case sir we have only cfi flash with x8 FPP mode hardware can't add serial prom devices we only have CPLD MAXII
that's why i m asking we don't want to configure from cpld
any other solutions please share us
thanks sir
Nome
Thanks for your Reply
In our case sir we have only cfi flash with x8 FPP mode hardware can't add serial prom devices we only have CPLD MAXII
that's why i m asking we don't want to configure from cpld
any other solutions please share us
thanks sir
Nome
