Forum Discussion

EivindH's avatar
EivindH
Icon for New Contributor rankNew Contributor
1 year ago

Flashing .elf to EPCQ

Hello!

I'm trying to program/flash a EPCQ64 with an .elf file through the active serial interface. What is the correct way to do this? The programing/flashing of the program (.sof/.pof) works, but i cannot seem to find a way for the .elf file. Do i need to convert the .elf file to .hex and add it to a page while generating the .pof file? Do i need to go via the FPGA through JTAG?

My configuration is using a EPCQ64 via a Cyclone III FPGA. I did the flashing of the program through Quartus II (through the active serial interface), but i have another newer machine running Quartus Prime Lite'

Any help or push in a right direction would be greatly appreciated!

Configuration
Programmable Logic Device

3 Replies

  • NurAiman_M_Intel's avatar
    NurAiman_M_Intel
    Icon for Super Contributor rankSuper Contributor
    1 year ago

    We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

    Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

    We appreciate your patience and understanding, and we are committed to providing you with the best support possible.


    Thank you for your understanding.


  • NurAiman_M_Intel's avatar
    NurAiman_M_Intel
    Icon for Super Contributor rankSuper Contributor
    1 year ago

    We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you