Honored Contributor
Honored ContributorHi,Maestor666,your reply is quite in time,thanks!
yes ,i have set base address to 0x00000000,and connected pin byte to vcc(3.3v),and between them i added a r-4.7k. BTW,i set it to work in WORD-mode,so address width is 21-bit(i don't use the pin-13,someone use it,and set address width to 22-bit,but i think this doesn't matter ),data width is 16-bit. pin15(ry/by)is also floated! https://www.alteraforum.com/forum/attachment.php?attachmentid=1316 https://www.alteraforum.com/forum/attachment.php?attachmentid=1317 https://www.alteraforum.com/forum/attachment.php?attachmentid=1318 Handsome
