Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Flash CFI in SoPC Builder

Hi All, I am trying to connect 22x8 bit (4MByte) flash memory on DE2 board via flash cfi controller. If I connect it to the Avalon tri-state bridge I got the following error: "signal tri_state ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Hi, if your CFI_flash is correct (data width and address width), then double clic on the tristate bridge, you have to define here address width, data width and how they are shared.