Forum Discussion

CosmoKramer's avatar
CosmoKramer
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

error running emif example design.

I am trying to run emif example design using model sim and running into this error after "ld_debug" command. # vlog -reportprogress 300 -sv C:/intelfpga_pro/22.3/quartus/eda/sim_lib/simsf_dpi.cp...
  • CosmoKramer's avatar
    CosmoKramer
    Icon for Occasional Contributor rankOccasional Contributor
    3 years ago

    i did not try this modelsim that comes with quartus because we use the questasim directly from mentor, as rest of our testbenches are not built around quartus ips.

    Is there a major difference between these two?

    • RichardT_altera's avatar
      RichardT_altera
      Icon for Super Contributor rankSuper Contributor
      3 years ago

      Questa*-Intel® FPGA Edition software only supports Intel’s (Quartus) simulation libraries, whereas Questa* Core can support any simulation libraries. The Questa*-Intel® FPGA Edition software includes all the features of Siemens EDA Questa* Core, including behavioral simulation, HDL test benches, and Tcl scripting.

      However, features specific to Questa* Prime are not supported in the Questa*-Intel® FPGA Edition software. Questa*-Intel® FPGA Edition software is slower than the Siemens EDA Questa* Core and Questa* Prime software.

      Best Regards,

      Richard Tan