Forum Discussion

CosmoKramer's avatar
CosmoKramer
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

error running emif example design.

I am trying to run emif example design using model sim and running into this error after "ld_debug" command. # vlog -reportprogress 300 -sv C:/intelfpga_pro/22.3/quartus/eda/sim_lib/simsf_dpi.cp...
AdzimZM_Altera's avatar
AdzimZM_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi Sandy,


The Intel Quartus Prime Pro version 22.3 is no longer support Modelsim 2021.3 simulator. It's supported "Questa*-Intel® FPGA Edition" simulator version 2022.1

The supported simulators can be checked in the "Intel® Quartus® Prime Pro Edition: Version 22.3 Software and Device Support Release Notes" document in the link below.

LINK: https://www.intel.com/content/www/us/en/docs/programmable/683706/22-3/eda-interface-information.html


Regards,

Adzim






CosmoKramer's avatar
CosmoKramer
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

Thank you for the reply.

My team uses modelsim and we were able to use it until quartus 21.3.

Please let me know if there is a work around to use 22.3 with modelsim.

Shifting to questa sim at this point will delay our work.

Regards,

Sandy