Forum Discussion

Junmo's avatar
Junmo
Icon for New Contributor rankNew Contributor
4 years ago

Error coccured during modelsim simulation

I have training board with a cyclone II device. so I have to use quartus II 13.0 sp1 sw. I installed the sw, and coded the circuit using verilog HDL. But during simulation in VWF , the a...
RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
4 years ago

Any reason you want to continue using the Quartus 13.1?

Since you do not see the error on Quartus 18.1, I would recommend to upgrade the design to the latest Quartus standard 21.1 as it is more stable.