Forum Discussion

New Contributor

5 years ago

Error (209027): Verification failed for device number 1

I get an error whenever trying to program an altera cyclone FPGA. I am trying to use the command line tool quartus_pgm in order to do this. I am currently on pop!_OS 20.04 linux (Ubuntu based) system...

YuanLi_S_Intel

Regular Contributor

5 years ago

Hi,

The error is happening during verification. It seems like the device part number selected in the quartus design is not same as the hardware. Please change the device part number again.

https://www.intel.com/content/www/us/en/programmable/quartushelp/13.0/mergedProjects/msgs/msgs/epgme_device_verify_error.htm

Thank You.

Forum Discussion

Error (209027): Verification failed for device number 1

Recent Discussions

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information

Cyclone 10 LP's Extended Industrial parts