Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

error -- Flash & NIOS2

Hello to all, i built a stand alone electronics with an EP2C8 fpga and an 2MB flash-ram. I flashed my EPCS4 device with my current design. By the way, i purchased a license for MegaCore functio...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I'll try both. I have a 1MHz source on my board. I have also checked the hardware connection between the ram and the fpga. The reset pin has allways high signal, I hope that's okay. Could we find out more with the nios2 flash programmer command line mode ???