Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorerror -- Flash & NIOS2
Hello to all, i built a stand alone electronics with an EP2C8 fpga and an 2MB flash-ram. I flashed my EPCS4 device with my current design. By the way, i purchased a license for MegaCore functio...
Altera_ForumHonored Contributor
Honored ContributorYou should have a special write (data 98h to address 55h) to enter CFI mode. It may come a lot later in your curve. Can you increase the buffer size and reduce the sampling clock frequency?
Or a better way could be to divide the buffer in several zones, each one of them triggered on an access.
