Forum Discussion

texano2123456's avatar
texano2123456
Icon for New Contributor rankNew Contributor
3 years ago

EPM7192QC160-20 and EPM7160QC160-15 (Obsoletes)

I have a pcb, which has two programmed Altera ICs installed (EPM7192QC160-20 and EPM7160QC160-15). Both work with a MC68EC030FE CPU with 4MB of memory(RAM) on an industrial PCB.

I would like to know if you know someone who can copy them or check if their firmware is correct.

Or if somebody can copy or read them.

regards

1 Reply

  • ak6dn's avatar
    ak6dn
    Icon for Regular Contributor rankRegular Contributor
    3 years ago

    This is going to be really hard to get done. Those are not JTAG programmable, so one would need access to the old Altera Programming Unit or a compatible 3rd party device programmer. The devices would have to be removed from the board for programming access.

    Unless you consider this hardware 'irreplaceable' and have a lot of money and time, my opinion is this is a dead end.