Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

EPCS128 JTAG indirect programming trouble

Hello! I'm Trying to program EPCS128 device in JTAG inderect mode, but at 94% Quartus II 11 shows this error: -------------------------------------------------------------- Info: Started Prog...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I have fixed the problem because I had a short circuit in the board between two protection diodes. I am nearly sure you have a hardware problem too.

ifdm