Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

EPCS controller access serial flash memory

Hi guys, I have the schematic of the NIOS processor which has been sent by the client in which he has a STM M25p32 serial flash memory.......whereas in the system.h file produced from the give...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Basically, ST M25Pxx devices are software compatible to EPCS. But cause no EPCS32 exists, M25P32 is most likely not recognized by the Altera tools.