Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

EPCS config failing advice needed

Morning folks, I have just created my first FPGA (EP3C10E144C8N)board with a config memory (AT25DF321A-SH-B). Whilst I seem to be able to program the device with the jic and then verify it, th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Many thanks Guys,

In the end I went to the 'known' compatible devices from ST and it works a treat. I will however be trying the the AT device again but with the ID switched off.

Again, many thanks.

D