Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

EPCS config failing advice needed

Morning folks, I have just created my first FPGA (EP3C10E144C8N)board with a config memory (AT25DF321A-SH-B). Whilst I seem to be able to program the device with the jic and then verify it, th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Good Catch Dave!

I knew the Cyclone devices die a "Read Silicon ID" but didn't know you could disable it.

Pete