Forum Discussion

krbreton's avatar
krbreton
Icon for New Contributor rankNew Contributor
6 years ago

EP1K50 Pin Assignment Issues

We are working with an older Altera EP1K50TC144-1 part. We are using Quartus 9.2 to create programs using Altera HDL (This is a legacy design that we needed to make some small updates to). The FPGA...
Rahul_S_Intel1's avatar
Rahul_S_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi Kyle,

Thanks for the question, to answer the above question I would like to set the expectation as I do not have the internal document to verify.

But in Generic Quartus environment the pin will assigned to tri state. . The above voltage as per me may be coming from another devices from the board.