Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Driving Multiple FPGAs and Fanout (Cyclone III)

Hi, I have a design that will comprise of 11 FPGA boards: 10 slaves and 1 master and each board is having one cyclone III FPGA. The communication between master and slaves is via a simple SRAM...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Hi,

It is a lot more complex than you have suggested, do a web search for VME bus and use some VME bus drivers to drive your backplane. VME is a standard protocoll for use in your type of application and it would save you a lot of design costs.

Uk Fixer