Forum Discussion

KURK123's avatar
KURK123
Icon for New Contributor rankNew Contributor
7 years ago
Solved

Detection of CPLD successfully configured.

Hi All, I am working on a board with CPLD and three other FPGAs. I am able to configure the CPLD using it's pof file. My question is, is there a way to indicate that the CPLD is configured correct...
  • Vicky1's avatar
    Vicky1
    7 years ago

    Hi,

    In case of custom board, I believe it should have some test points/nodes where you can make use of probes for multi-meter or Oscilloscope.

    you can make a use of simple D Flipflop code for checking the status of particular pin of CPLD.

    Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

    Best Regards

    Vikas Jathar

    (This message was posted on behalf of Intel Corporation)

Vicky1's avatar
Vicky1
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

In case of custom board, I believe it should have some test points/nodes where you can make use of probes for multi-meter or Oscilloscope.

you can make a use of simple D Flipflop code for checking the status of particular pin of CPLD.

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar

(This message was posted on behalf of Intel Corporation)