Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

DE0-Nano Control Panel connect problem

Hi, this is my first time use Altera fpga board, i copy the "DE0_Nano_ControlPanel" folder and try to run the application, it shows connection problem due to two missing file "jtag_client.dll" ...
MGree42's avatar
MGree42
Icon for New Contributor rankNew Contributor
6 years ago

This worked for me on the DE10-Lite board as well.

When I ran this command:

 .\bin64\quartus_pgm.exe -m jtag -c USB-Blaster[USB-0] -o "p;C:\Users\Michael Green\OneDrive\Documents\DE10-Lite-v.2.0.3_SystemCD\Tools\ControlPanel\DE10_Lite_ControlPanel.sof"

I got this error:

Error (213013): Programming hardware cable not detected

So with the board connected, I just reran this:

C:\IntelFPGA_lite\19.1\quartus\drivers\DPInst

I then relaunched the control panel and was able to connect to the board

Alzaid's avatar
Alzaid
Icon for New Contributor rankNew Contributor
5 years ago

Thanks to you,I was able to solve.