Forum Discussion

LSOCH's avatar
LSOCH
Icon for New Contributor rankNew Contributor
5 years ago

DDR4 VTT termination for ADDRESS/CONTROL - ARRIA10 HARD IP

Hi , if i have a single x16 DDR4 component connected to a ARRIA10 device and running at 800 Hz clock(1600 MT\S ) - is there a waiver that allow me to not have a VTT termination for the ADDRESS\CON...
yoichiK_altera's avatar
yoichiK_altera
Icon for Contributor rankContributor
5 years ago

You will need to run the Board simulation if you wish not to terminate the ADR/CMD to VTT.