Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

CycloneV's Altera PLL V13.1 simulation problem

Hi, I'm using Altera SOCkit (CycloneV) and generated altera pll v13.1 using quartus v13.1.0.162 web edition + latest patch. Now I'm trying to simulate the generated pll using modelsim but ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

What clock frequency are you generating out of the PLL? If it's 'too high' I suspect the cut down version of ModelSim included with the Web Edition of Quartus won't simulate it.

This is indicative of behaviour I've seen when using PLLs generated for Cyclone IV devices (ALTPLL). It would quite happily simulate with output frequencies below 100MHz, but not over...