Forum Discussion

AGofs's avatar
AGofs
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

CycloneV :MSEL(4:0) and VCCPGM voltage

Good morning , I'm working with CycloneV GX at AS (x1 and x4) Standard configuration. I've read at CycloneV Handbook ,that MSEL(4:0) pins shall be connected to VCCPGM or GND directly. The Voltage ...
  • HBhat2's avatar
    HBhat2
    Icon for Contributor rankContributor
    6 years ago

    Hi @JwChin​ ,

    Thank you for sharing the kdb. This clears my confusion and it helps me to conclude that for Cyclone V devices, VCCPGM must be connected to either 3.3V or 3.0V for ASx1, ASx4 mode.

    WithRegards,

    HPB