Forum Discussion

Binoyjohnson's avatar
Binoyjohnson
Icon for New Contributor rankNew Contributor
3 years ago

Cyclone V Soldering Process

Hi,

We are using cyclone V (5CSEBA4U23I7N) in one of the project. Is it recommended to assemble the SOC in the first reflow process?. Is there any problem, if the SOC pass through the second reflow it includes DDR as well, in terms of reliability. We are following the lead free reflow process.

Thanks Regards

Binoy Johnson

Board Debug

5 Replies

  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    3 years ago

    Hello,

    To answer your request. For reflow profile, we follow the Industrial Standard – IPC/JEDEC: J-STD 020E or newer.

    Regards,

    Nazrul Naim


  • Binoyjohnson's avatar
    Binoyjohnson
    Icon for New Contributor rankNew Contributor
    3 years ago

    If you can answer with Industrial Standard – IPC/JEDEC: J-STD 020E a screenshot it would be great

  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    3 years ago

    Hello,

    ​

    Sorry for the delay. For your information the information for this one can be directly obtained from the JEDEC official website.


    Hope that answers your question.


    Best regards,

    Nazrul Naim


  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,

    As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending.

    Regards,

    Nazrul Naim


  • Binoyjohnson's avatar
    Binoyjohnson
    Icon for New Contributor rankNew Contributor
    2 years ago

    If you can arrange screenshot, it would be great. I couldn't get the information.