Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Cyclone V Clock Not Toggling

Device: 5CGTFD9E5F35C7 Quartus Version 14.1 I am currently having problems with the on-board oscillator (CLK5p(U31)) not toggling when used as the clock source in Signal Tap(e.g. the 'waiting...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

I was using the terminology provided in the documentation. I attached a picture of the documentation. So when I use the CLK5p(Pin U31(p) Pin U30(n)) driven from source X5 is does not toggle when I examine my design in Signal Tap giving me the 'waiting for clock' status.