Forum Discussion

XinYuSu's avatar
XinYuSu
Icon for New Contributor rankNew Contributor
4 years ago

Cyclone V 5CEFA9U19C8 AS Configuration with Macronix mx25l12833fm2i-10g

Hi, I'm currently trying to get a Cyclone V 5CEFA9U19C8 FPGA to boot via Active Serial using the MX25L12833FM2I-10G chip. Based on the datasheet, this chip is the 8-Pin SOP version of the MX25L128...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
3 years ago

You need to turn on the Auto-restart configuration after error option in the General page of the Device and Pin Options dialog box in the Intel Quartus Prime software in order for n_status signal to come back up, else it will remain low after configuration error.