Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Cyclone IV GX bank 9 VCCIO

Just wondering if anyone can help.. I'm using a 4CGX150 with the JTAG pins (TDI, TDO etc.) dedicated to the usual 10 pin connector for JTAG programming. These pins are not used for any other IO...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Thanks Dave for an excellent and detailed reply.

Yes I'm aware of the ESD issues, I have series resistors in line to the device. I sometimes add a DALC208SC6 device to absorb any stray static. The tiny logic is a good suggestion, but I have the board layout complete, so next time. I was more concerned about the VCCIO voltage, so I will go with +2.5V on pin G4 (VCCIO Bank 9) of the device.