Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Cyclone IV EP4CE6E22C8N

Hello. I am going round and round in circles trying to program a Cyclone IV EP4CE6E22C8N on a mini board. I get the message:- "Error (169057): Can't place I/O pin clk at pin location 24 -- I/O pin us...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Did you set the ASMI (DCLK, ASDO, DATA0,nCSO) pins to use as regular IO in the Quartus II option? Go to Device and Pin option -->Dual-purpose pins then change to "Use as regular IO" for DCLK, ASDO, DATA0 and nCSO.