Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Cyclone IV BGA reconfiguration data frame error. Possible causes?

Hi, I'm using a EP4CE22F17I7 (this is my first BGA board) that doesn't want to configure. Configuration scheme - AS MSEL pins "010" with the high being 2.5 V. (The VCCIO is 3.3 V on all ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Problem solved...

Vertical migration was incorporated and the intend was to populate the board with the EP4CE22F17I7N, but was populated with EP4CE15F17I8L.

I know, check the device PN first! :oops: